Does it?
Lowered tuning cars are not always very practical – because even lowered curbs are a hindrance. And now this weird Caddy. But the thing does have a meaning.
Alternatively, you can view the media content (images and video) directly via the following links:
Pretty obliquely: The VW Caddy from MR Car Design can greatly lower back
This is based an air suspension with level control There is a version with air suspension on both axles, and one in which only the rear axle will be replaced lowered Quite likely, the Caddy is hardly more than the curb come Also for the wheels is limited. Tuning fans can be mounted 19-inch alloy wheels The middle layer should be suitable for everyday use Also, can you put up the car – on bad roads certainly an advantage The air suspension, Caddy may seem strange, but at low suspension settings can be easily wheelchair users invited by a ramp rear The suspension is adjusted by remote control or fully automatic Except for the transport for the disabled, the modified Caddy is also suitable for professionals who need an increased payload, and for Tuning fans <>
Pretty obliquely: The VW Caddy from MR Car Design can greatly lower back
in 2003 introduced the third generation of the VW Caddy is still relevant. Volkswagen’s workhorse based on the Golf V, but has held back a four-link independent suspension a leaf-sprung rigid axle. To get rid of the typical truck rear axle, now opens an intriguing possibility. An air suspension
with ABE and UBB
The tuning company from MR Car Design Erftstadt near Cologne adorns the high roof combined air suspension at the front and rear axle. She is comfortably designed according tuner, where the height is at the front and rear, remote control or automatically adjustable. Even with an air suspension for the rear axle, the car can be equipped. Both with an ABE (general operating) and a clearance certificate (UBB) by VW. The price for the air suspension on the rear axle is about 2,500 €, 4,500 € for both axes are due.
And for what?
Whoever looks at the Caddy slanted one wonders, is probably what the whole thing should be good. MR Car Design says: So the car can be modified for people with disabilities. Background: Normally, a car for wheelchair users are strongly modified, with the rear sill is cut. With the air suspension is not necessary. The car is lowered in the back and created a simple ramp. So the wheelchair into the car gets pretty easy. In addition, this version for craftsmen because of the increased payload by 300 pounds is interesting. Finally, aiming at MR Car Design and Tuning fans. In order to get a little caddy corner from the commercial vehicle, the Caddy also receives alloy wheels in 8.5 x 19 inches with a 225/35-Bereifung.
(Auto News)
12/28/2011 09:33 clock
More Auto News
src=”http://www.n24.de/media/import/autonews/autonews_20111228_15/31391_mrc_vag_12_cad_2_THUMBNAIL_86X66.jpg”
discussions with who-knows-was.de
src=”http://www.n24.de/media/import/autonews/autonews_20111228_15/31391_mrc_vag_12_cad_2_THUMBNAIL_86X66.jpg”
You are in: news » car
Related Post :
Buying a used car: Fraudulent Blender Then you need to make